12 Option -JC24X
100 Jetter AG
12.4 Digital Outputs
12.4.1 Technical data
Technical Data - Digital Outputs
8 digital outputs DC 24 V, 0.5 A, pnp
Output terminals Plug-in terminal blocks
LEDs for inputs 1 - 8 24 V output, switched;
The LED is lit, if the output has been
activated, and if the supply voltage has
been connected to X30.
Type of outputs Transistor, pnp
Rated voltage DC 24 V -15 % ... +20 %
Voltage range 20 ... 30 V
Load current 0.5 A max. per output
Output power of outputs 144 Watts
Electrical isolation Electrical isolation to logic is available
Protective circuit Short circuit, overvoltage,
overtemperature, polarity reversal
Protection against inductive loads Yes
Principle of operation Non-latching
Signal voltage ON Typ. V
supply
-1.5 V
INFO
All digital inputs and outputs have got the same reference potential.
A digital output may directly (without additional load) be connected to a digital
input.
To Next Page
Loading...
