JetMove D203 2.1 Scope of Delivery
Jetter AG 23
2 Installation of the JetMove D203
2.1 Scope of Delivery
• Digital servo amplifier JetMove D203
• Mating connector plugged-on
• Cable straps serving as strain relief and motor cable shield
• User Manual
Accessories
Accessories are not part of the scope of delivery!
• System bus cable of cable confection # 530 x.x m; length: 0.2 m through 5.0 m.
See chapter 7.8 "JX2 System Bus", page 74
• Motor power cable; please refer to chapter 7.2 "Motor Connection", page 50
• Resolver cable, see chapter 7.3 "Resolver Connection", page 56
• HIPERFACE cable, see chapter 7.4 "HIPERFACE Connection", page 59
• Motors, e.g. synchronous servo motors of the motor series JH, JK or JL, made by
Jetter AG
• Motor circuit-breaker, see chapter 5 "Technical Data", page 37
• Circuit-breaker, see chapter 5 "Technical Data", page 37
• Isolating, respectively autotransformer
• Mounting screws, 2 pcs.; refer to fig. 4, page 25
INFO
If you are not sure which mounting accessories you will need, please contact
Jetter AG.
To Next Page
Loading...
