Jetter JetMove D203 - HMI Cable for LCD 16 - 34 and

JetMove D203-JC24X 12.10 Interface Cables
Jetter AG 121
12.10.3 HMI cable for LCD 16 - 34 and 110
Specification of Connectors
On the side of the integrated controller
• 8-pin MiniDIN connector (male)
Type: KMDLA - 8P
Manufacturer: KYCON
• Allowed conductor size: 0.128 ... 0.051 mm
2
On the HMI side
• 15-pin male SUB-D connector in metallized housing (quality grade 3).
• Allowed conductor size: 0.25 ... 0.128 mm
2
Connecting Cable Specifications
• Number of cores: 6
• Core cross-sectional area: 0.14 mm
2
• Cable length: 2.5 m (cable confection # 192 2,5m)
• Cable length: 5 m (cable confection # 192 5m)
• Max. cable length: 400 m
Cable Shielding
• Complete shielding, no paired shielding
• The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area (shield twisted, clamped under the
strain relief clamps, and wrapped with copper foil).