12 Option -JC24X
124 Jetter AG
12.10.5 HMI cable KAY_0533-0025
The HMIs LCD 52, LCD 54, and LCD 54Z are equipped with a non-detachable cable
connecting the LCD with the integrated controller. On the integrated controller side,
this cable has a 15-pin male SUB-D connector. For connection of the HMI to the
8-pin MiniDIN female connector of the -JC 24x (interface SER2), a cable adapter will
be needed.
Specification of Connector/Socket
On the side of the integrated controller
• 8-pin MiniDIN connector (male)
Type: KMDLA - 8P
Manufacturer: KYCON
• Allowed conductor size: 0.128 ... 0.051 mm
2
On the HMI side
• 15-pin female SUB-D connector in metallized housing (quality grade 3).
• Allowed conductor size: 0.25 ... 0.128 mm
2
Connecting Cable Specifications
• Number of cores: 6
• Core cross-sectional area: 0.14 mm
2
• Cable length: 25 cm
Cable Shielding
• Complete shielding, no paired shielding
• The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area (shield twisted, clamped under the
strain relief clamps, and wrapped with copper foil).
To Next Page
Loading...
