12 Option -JC24X
102 Jetter AG
12.4.3 Description of connections
Terminal Specifications
• 8-pin , respectively 4-pin plug-in screw terminals COMBICON RM 3.5
(for printed-circuit boards)
• Allowed conductor size: 0.25 ... 2.5 mm
2
(AWG 24 ... AWG 14)
with bootlace ferrules in a plastic sleeve: 0.14 ... 0.5 mm
2
(AWG 26 ... AWG 20)
• Torque (for input plug screws): 0.2 Nm
• The maximum stripping length for input lines is 8 mm
• The accepted VDE guidelines have to be followed
• Slot-head screw driver: 0.4 x 2.5 mm
Connecting Cable Specifications
• Not required
Cable Shielding
• Not required
Occupation of 8-Pin, Respectively 4-Pin Plug-In
Screw Terminals
View Pin Signal Number
X32
X32.12 Digital output # 12 112
X32.11 Digital output # 11 111
X32.10 Digital output # 10 110
X32.9 Digital output # 9 109
X31
X31.8 Digital output # 8 108
X31.7 Digital output # 7 107
X31.6 Digital output # 6 106
X31.5 Digital output # 5 105
X31.4 Digital output # 4 104
X31.3 Digital output # 3 103
X31.2 Digital output # 2 102
X31.1 Digital output # 1 101
To Next Page
Loading...
