Jetter JetMove D203 - HMI Cable KAY_0386-XXXX

12 Option -JC24X
122 Jetter AG
12.10.4 HMI cable KAY_0386-xxxx
Specification of Connector/Socket
On the side of the integrated controller
• 8-pin MiniDIN connector (male)
Type: KMDLA - 8P
Manufacturer: KYCON
• Allowed conductor size: 0.128 ... 0.051 mm
2
HMI Cable for LCD 16 - 34, LCD 110
Integrated
Controller
Shield HMI
SER2
Connect shield with the greatest
possible surface area!
Use metallized housing only!
Pin Signal Pin
6 DC +24 V 15
2GND12
5SDBRDB6
7SDARDA7
3 RDB SDB 4
1 RDA SDA 5
Shield
Clamp
Shield
INFO
It is recommended to buy the cables from Jetter AG.
A defective cable can lead to destruction of the JC-24X or of the HMI.