JetMove D203-JC24X 12.2 Power Supply
Jetter AG 95
12.2.2 Description of connections
Terminal Specifications
• 2-pin plug-in screw terminal COMBICON RM 3.5
(for printed-circuit boards) (AWG 24 ... AWG 14)
• Allowed conductor size: 0.25 ... 2.5 mm
2
(AWG 24 ... AWG 14)
with bootlace ferrules in a plastic sleeve: 0.14 ... 0.5 mm
2
(AWG 26 ... AWG 20)
• Torque (for input plug screws): 0.2 Nm
• The maximum stripping length for input lines is 8 mm
• The accepted VDE guidelines have to be followed
• Slot-head screw driver: 0.4 x 2.5 mm
Connecting Cable Specifications
• Will not be needed
Cable Shielding
• Not required
Fig. 22: JM-D203-JC24X: Connection of the input and output voltage supply
Assignment of the 2-Pin Plug-In Screw Terminal
View Pin Signal Comment
X 30
X30.24 V DC 20 ... 28.8 V Power supply for
digital outputs
Peak current 6 A
X30.0 V GND High-impedance
connection to the
enclosure
(1 MOhm / 10 nF)
To Next Page
Loading...
