JetMove D203 7.2 Motor Connection
Jetter AG 51
7.2.2 General Information
NOTICE
Alternative measures to avoid malfunctions of the control system and the motor:
Operate the brake through a separately shielded brake line.
Always connect brake lines to a separate power supply unit DC 24 V if
brake and motor lines are run together in one bunch of cables, and are
not separately shielded.
NOTICE
Measures to avoid oscillation and blocking of the motor:
Avoid mixing-up of the motor phases, resp. be sure to connect the
motor phase cables according to the pin assignment.
To Next Page
Loading...
