12 Option -JC24X
126 Jetter AG
12.11 Anybus-CC
The expansion by an Anybus-CC module makes easy communication with other bus
systems possible. Only one Anybus-CC module at a time can be integrated into the
JetMove D203-JC24X devices. There are various Anybus-CC modules for various
bus systems.
12.11.1 Installation instructions
12.11.2 Prying the break-away shield
In the delivered condition of the JetMove D203-JC24X, the optional Anybus-CC
module has not been installed yet. For installing the module, the break-away shield
has to be removed. Use a flat-headed screwdriver to pry the shield. Insert the
screwdriver into the slot of the shield and move it forward and backward several
times, until the shield breaks away.
Fig. 36: Installing the Anybus-CC: Prying the break-away shield
INFO
For mounting or dismounting, the module has to be de-energized.
To Next Page
Loading...
