Jetter JetMove D203 - Connection Via Several Switches

JetMove D203-JC24X 12.6 Ethernet Interface
Jetter AG 107
12.6.4 Connection via several switches
The switches have to be interconnected by means of crossover cables. The
connections between -JC24X and switch, as well as between PC and switch, have
to be made by means of straight-through cables.
Fig. 30: Ethernet connection from switch to switch
Crossover
cable
1:1
Switch
1:1
JetMove-D203-JC24X
JetMove-D203-JC24X
1:1
Switch
PC
INFO
Terminals have to be interconnected by means of crossover cables:
• PC to PC
• -JC24X to PC
• -JC24X to -JC24X
•etc.
Terminals with infrastructure components (e.g. switch) have to be
interconnected via straight-through cables:
• PC to switch
• -JC24X to switch
•etc.
Infrastructure components have to be interconnected by means of
crossover cables:
• Switch to switch
• Switch to router
•etc.