JetMove D203 7.1 Mains Power Supply
Jetter AG 49
7 Description of Connections
• For axis A, the connection designations X71 through X74 are available.
• For axis B, the connection designations X81 through X84 are available.
7.1 Mains Power Supply
Specification of terminal X1
• 3-pin screw clamping terminal (type PC 4/ 3-ST-7.62)
• Cross-sectional area of the connecting cable: 0.25 - 4.0 mm
2
(AWG 24 - AWG 12)
• Bladed screw-driver: 0.6 x 3.5 x 100 mm
• Stud torque for the screw clamping terminal:
0.5 Nm - 0.6 Nm (4.4 - 5.3 lbf-inch)
Connecting cable specifications
• Cable size: 3 * 1.5 mm² (AWG 16(3))
• Material: Copper
• Temperature class: 60 °C
• Stripping length of cores: 6 mm
• Bootlace ferrules are recommended
Cable shielding
• Not needed
Fig. 8: Connection of the mains power supply
Power Supply
1-Phase Connection
Terminals X1 Signal Specifications
L L • AC 230 V between
mains phase and
neutral
NN
PE PE conductor
yellow / green
PE
X1
L PEN
blue
Neutral
black
Mains Phase
Fuse or
Overcurrent Circuit Breaker or
Motor Current Circuit Breaker
To Next Page
Loading...
