Jetter JetMove D203 - Page 115

JetMove D203-JC24X 12.8 Setting the IP Address
Jetter AG 115
Example 1: Determining the IP Address Resulting from the
Address Switch Positions
Then multiply the value of the address switch "High" by 16 and add it to the value of
the address switch "Low".
(The hexadecimal value A corresponds to the decimal value 10, B = 11, C = 12, D =
13, E = 14, and F = 15
Fig. 34: Determining the IP address based on address switch positions
Example 2: Setting a Specific IP Address
The two last octets of the IP address 192.168.1.78 are to be converted into a
hexadecimal value.
Decimal numbers greater than 15 are converted according to the following example
for the 4th octet:
192 . 168 . 1 . 197
Thus, octet 4 is
Switch Positions (hex):
Chex x 16 dec + 5 dec
or decimal
12 x 16 + 5 = 197
197 dec
192 . 168 . 1 .
1
1
1
1
0
0
0
0
=C
=5
Address
High Low
High Low
Decimal/Hexadecimal Conversion
Dec
01234567891
0
1
1
1
2
1
3
1
4
1
5
Hex
0123456789ABCDEF