Jetter JetMove D203 - Page 68

7 Description of Connections
68 Jetter AG
Fig. 17: Incremental encoder connection of a +5 V supply voltage
Fig. 18: Incremental encoder connection with feedback controlling of the
supply voltage
INFO 1.1
Supply voltage +5 V at the JetMove D203:
If the sense wires are not connected, the supply voltage of +5 V is issued at the
JetMove D203. Due to performance degradation, a lower voltage might be
supplied to the encoder.
Incremental Encoder
JetMove D203
X71 / X8 1 :
15-Pin
SUB- D C o n n e c t o r
Se n s e +
Se n se -
+5V
0 V
K1 +
K2 +
K0 +
K1 -
K2 -
K0 -
6
14
5
13
1
2
3
9
10
11
+5V
0V
K1
K2
K0
K1 -
K2 -
K0 -
5 V
INFO 1.2
Supply voltage +5 V at the encoder:
With the help of the sense connections, the supply voltage can be controlled in a
way that +5 V are supplied to the encoder. Wiring should be carried out as follows:
JetMove D203
X71 / X81:
15-pin
SU B- D
connector
5 V
6
5
13
14
1
2
3
9
10
11
Se n s e +
+5 V
0 V
K1 +
K2 +
K0 +
K1 -
K2 -
K0 -
Se n s e -
+5 V
0 V
K1
K2
K0
K1 -
K2 -
K0 -
Incremental encoder