Jetter JetMove D203 - Page 80

8 Status Monitoring
80 Jetter AG
Display Status Description
7 QUICK STOP
ACTIVATED
A quick stop has been activated.
The drive is being decelerated to n =
0 and then locked.
E ERROR REACTION
ACTIVATED
A fault has been recognized.
An adjustable error reaction may be
active.
F MALFUNCTION The drive controller is locked, error
can be acknowledged.
F X. X. ERROR NUMBER Fault with number X. X. has occurred.
. Flashing dot Warning activated
0. NULL Boot sector has been activated
E. E OS flash gets deleted
L. L OS loader gets loaded
P. P OS is transferred to the flash memory
U. U Boot sector is waiting for OS update
JetMove D203 - Seven-Segment Display
Mode 0: Normal Operation
JetMove D203 - Seven-Segment Display
Mode 1: Commissioning
Display Description
gn
Actual Value
< 0.5 % n
max.
--
bM > 0, n > 0 --> quadrant I Mode of operation -
Motor
cM < 0, n > 0 --> quadrant II Mode of operation -
Generator
eM < 0, n < 0 --> quadrant III Mode of operation -
Motor
fM > 0, n < 0 --> quadrant IV Mode of operation -
Generator
a Positive current limit has been reached --
d Negative current limit has been reached --