SECTION 4 - EMERGENCY PROCEDURES
4-2 31217162
ERT Machines
1. Ensure the machine is in the stowed position. Chock wheels
securely. Connect machine to suitable towing equipment.
2. Pull out the emergency stop switch and position the key-
switch to ground mode.
3. Look for the yellow button (1) inside the hydraulic compart-
ment on the side of the ground control panel. Press and hold
for at least one second. Once released, the alarm will sound.
4. Remove chocks and tow machine.
5. After towing is complete, chock the wheels.
6. To reset the brakes, push the yellow button again, recycle
power to the machine, or position the keyswitch to platform
mode.
1. Electric Brake Release Button
To Next Page
Loading...
