SECTION 5 - ACCESSORIES
5-2 31217162
5.2 FOOTSWITCH
1. Footswitch Assembly
The footswitch serves as another enable switch in the function
control circuit. It must be depressed in sequence with the plat-
form control joystick trigger switch to enable operation of
machine functions when using the platform controls. Power is
removed from the platform controls when the footswitch is
released.
NOTE: This accessory is only available in the Korea market.
5.3 GENERATOR (2500W)
The generator (2500W) supplies AC power from the engine com-
partment to an AC receptacle in the platform.
All power regulation components are located in a watertight box
connected by cable to the generator. The generator is activated
by a switch on the platform control box.
Output
• 110V, 60 Hz
Safety Precautions
DO NOT OVERLOAD PLATFORM.
• Ensure no personnel are beneath platform.
• Keep lanyard attached at all times.
• Do not use electrical tools in water.
• Use correct voltage for tool being used.
• Do not overload circuit.
To Next Page
Loading...
