SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
31217162 6-1
SECTION 6. GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available Specific to this Machine:
Service and Maintenance Manual...................................31217913
Illustrated Parts Manual ......................................................31215867
6.2 SUPPLEMENTAL INFORMATION ONLY APPLICABLE
TO CE MACHINES
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC.
The A-Weighted emission sound pressure level at the work plat-
form is less than 70dB(A).
The guaranteed Sound Power Level (LWA) per European Directive
2000/14/EC (Noise Emission in the Environment by Equipment
for Use Outdoors) based on test methods in accordance with
Annex III, Part B, Method 1 and 0 of the directive, is 106 dB
(RT2669 and RT3369 only).
The vibration total value to which the hand-arm system is sub-
jected does not exceed 2,5 m/s2. The highest root mean square
value of weighted acceleration to which the whole body is sub-
jected does not exceed 0,5 m/s2.
To Next Page
Loading...
