8-4
MAIN ROTOR BLADE ATTACHMENT (BLADES NOT INCLUDED)
Firmly secure the main
rotor blades to the rotor
head as shown above. Be
sure to note the proper
direction of the rotor
blades when assembling
(clockwise rotation). Main
blades should be tightened
so they can pivot when
moderate pressure is
applied. Do not allow the
main blades to swing
freely within the main
blade holders.
Socket
Head Bolt,
4 x 35 mm
(1 pc)
Not included,
order NOH680C
or NOH700S
12 mm
Insert the main rotor blade spacers as shown.
Apply a light drop of CA
adhesive to hold the main
rotor blade spacers in place.
Lock Nut, 4 mm (1 pc)
Hold the 4 mm Lock Nut while tightening
using a Wiha 7 mm Nut Driver or equivalent.
Lock Nut, 4 mm
Socket Head Bolt, 4 x 35 mm
.........................................2 pcs
............2 pcs
Main Roter Blade Spacers (12 mm Grip)
...................................4 pcs
5 x 35 mm bolts and
5mm nuts are also
included with this kit.
Note:
To Next Page
Loading...
Need help?
General
