85
VIGOR
™
CS MANUAL PARTS LISTINGS
Main Rotor Head/ Washout Assembly
Part #  Description Quantity   Comments/ Additional Contents
980013 Socket Head Bolt, 3 x 8 mm   10
980004 Set Screw, 4 x 4 mm  10
996020 Flybar Paddles, Red 1
994008 Flybar Weights   2 Complete w/set screws
960189 Head Button 1 Complete w/one 3 x 8 mm socket head bolts
960180 Blade Spindle Shaft  1 Complete w/two 5 x 10 mm socket head bolts
980040 Nylon Lock Nut, 4 mm 10
960179 Flybar Control Arm   2 Complete w/steel joint ball and screws
960288 Blade Dampeners, 50 2
960195 Main Rotor Body 1 Complete w/four 3 x 8 mm socket head bolts
970098 Universal Ball Link (short)   10
994005 Control Ball, 14 mm  2
960176 Blade Holder Spacer  2
980001 Set Screw, 3 x 4 mm   10
980052 Control Rod, 2.3 x 15 mm 2
960258 Seesaw Mixing Arm Assm. w/BB   1 Complete w/all hardware
960178B  Seesaw Mixing Arm w/BB (23) (optional) 2 Hardware not included
980039 Nylon Lock Nut, 3 mm Low Profile  10
994007 Spindle Shaft Guide   1
970115 Washer, .03 x 4.5 x 0.7   10
996026 Main Blade Holder 2 Complete w/two 14 mm control balls
970082 Washer, .03 x 4.5 x 0.4   10
980037 Hex nut, 2 mm 10
980030 Button Head Bolt, 3 x 5 mm  10
970069 Blade Bolts w/Spacers  2 Complete w/two 4 mm bolts, and 12 mm grip spacers
980075 Nylon Lock Nut. 5mm   10
980016 Socket Head Bolt, 3 x 15 mm 10
970029 Seesaw Spacer Collar  2
970077 Main Rotor Shaft Bolt, 3 x 22 mm 2 Complete w/two lock nuts and washers
996028 Seesaw Shaft Assembly  1 Complete w/all hardware
970010 Washout Link 2 Complete w/all hardware  
981015 CA Stopper Ring 10
960013 Washout Base 1
970004 Universal Ball Link  10
980053 Control Rod, 2.3 x 50 mm 2
980042 Control Rod, 2.3 x 30 mm 2
981026 Bearing, 8 x 16 x 5 mm   2
970099 Washer, 12 x 16 x 0.5 mm  2
981027 Thrust Bearing, 8 x 16 x 5 mm  2
970093 Spindle Shaft Washer  2
980074 Socket Head Bolt, 5 x 10 mm  10
960573 Blade Dampeners, 45 2
996021 Main Rotor Head Assembly, Complete   1 Preassembled w/all hardware
960249 Washout Arm w/BB  1   Complete w/all hardware
980016 Socket Head Bolt, 3 x 15 mm   10
981031 Bearing w/Flange, 3 x 8 x 4 mm  2
970119 Spacer, 3 x 5 x 1.8 mm 2
996012 Main Rotor Shaft 1
KSJ330 Flybar Paddles, Grey 1