GPS Navigator J-NAV500
11
1.2 Features
This navigator is equipped with the following features.
• Large backlit dot matrix liquid crystal display
The large display makes it easy to view the information provided by the many display modes. The
backlit keyboard keys facilitate night operation.
• Graphic representation
The CDI display mode allows you to get the direction to steer at a glance, supports safe navigation
and saves fuel.
The plot display mode displays the symbols registering the route and each waypoint.
• Menu driven easy operation
The display menus facilitate operation by showing what to do next. Menu selections and data
entry are performed with an easy-to-use dial.
• Customize
The great number of features provided makes it possible to customize functions and build your
own navigation system.
• One-touch removal and installation
The display can easily be removed or installed by pressing the button on the rear panel.
• Support for seven display languages is provided.
1.3 Equipment supplied
The table below lists items that are included with your J-NAV500. If an item is missing, contact your
JRC dealer for assistance.
The following optional accessories are also available.
Flush mount kit: MPTG30432
DGPS receiver: DGPS200
GPS receiver: GPS100
24 VDC power supply unit: NBG-121
AC power supply unit: NBG-122
Item Description Q'ty Remarks
Display unit NWZ-4551 1
Bracket MPBX35850 1 Included with the navigator
Power cable CFQ-8410 1 Length 1.8 m, with a fuse (2 A)
Fuse MF60NR-2A 1 Spare fuse (2A)
Tapping screws MPTG30149 1 4 pcs.
Instruction manual DC50-NWZ-4551 1 English
To Next Page
Loading...
Need help?
General
