GPS Navigator J-NAV500
57
4.18.3 Erasing route plans
Registered Route plans can be erased using the procedure described below.
Display example
(1) Press in the [ROUTE] display mode.
(2) Turn to select [ERASE ROUTE] and press .
(3) Turn to select the desired route plan number (02 for the example) and press . This
displays the message [ARE YOU SURE? ENT].
(4) Press once more to erase the selected route plan after which the [ROUTE MENU] ap-
pears.
• To cancel deletion, press .
[Route Menu]
[ROUTE]
display mode
(4) This example will show how to delete waypoint 003 from LEG 002 and to insert a new waypoint
005.
• Deleting waypoint #003
As shown above, turn to select LEG002 and press to confirm LEG002.
Press to delete #003 of LEG002. This deletes waypoint #003 and the number of leg are
decremented.
• Insert waypoint #005
As shown above, turn to select LEG002 and press to confirm LEG002.
Press , enter #003 for #005 and press .
Waypoint #005 is inserted and the number of leg are incremented.
Tip You cannot edit a route plan that is being executed.
To Next Page
Loading...
