JRC J-NAV 500 - Waypoint display mode and waypoint menu; 4.17.1 Editing Waypoint Lists

GPS Navigator J-NAV500
49
For information on entry procedures, see Section 4.6, “Basic menu selection operations.”
4.17.1 Editing Waypoint Lists
Registered waypoints can be displayed in the [WAYPOINT] display mode and edited them.
(1) Scroll the list in the [WAYPOINT] display mode and select the number to be edited and press
. This action displays the [WAYPOINT LIST EDIT] display.
(2) Edit the waypoint and enter it again. This returns you to the [WAYPOINT] display mode.
WAYPOINT display mode and waypoint menu
• The [WAYPOINT] display mode is used for displaying and editing waypoints. (See Section
4.17.1.)
• The following settings can be made in the [WAYPOINT MENU] displayed by pressing
in the [WAYPOINT] display mode.
• Waypoint setting (latitude, longitude/TD/bearing, distance) (See Section 4.17.2.)
• Erasing, copying and measuring waypoints (See Section 4.17.3.)
• Sorting waypoint lists (See Section 4.17.4)
Display example
[WAYPOINT] display mode [Latitude, longitude display format] [TD display format]
[WAYPOINT Menu] display
or
[WAYPOINT] display mode [WAYPOINT LIST EDIT] display