GPS Navigator J-NAV500
64
(1) Press in the [STATUS] display mode.
(2) Turn to select [SPECIAL FUNCTION] and press .
The [SPECIAL FUNCTION] display mode appears.
(3) Turn to select [SIMULATOR] and press .
(4) Set to
on
or
off
(default value).
The [SIM] indicator goes on when the simulator is on. Actual navigation cannot be performed during
simulation. The simulator must be turned off before navigation.
4.21 Displaying the Simulator Mode
The simulator function allows you to view approaches to waypoints and following route plans on the
various navigation displays when the ship is not actually moving.
Display example
(5) Memory data input
Waypoint and route plan data can be downloaded separately from external equipment such as a
PC.
During the download the message [DOWNLOADING] is displayed. When the message
ÒDOWNLOADINGÓ is displayed, inputs are received from external equipment. The time
required for the transfer depends on the amount of data transferred.
• Waypoint data input
Select [INPUT WPT DATA] and press .
• Route plan data input
Select [INPUT ROUTE DATA] and press .
The transfer rate is one memory per second.
[STATUS/SF MENU] display mode [SF MENU] display mode
To Next Page
Loading...
