JRC JMA-5212-4/6 - Radar Processing Circuit CDC-1350; AIS Processing Circuit CDC-1353

2-20
2.5.3. Radar Processing Circuit CDC-1350
(1) S300: 6-bit DIP-SW. All the bits are
factory-set to OFF. Do not change any of
the factory settings.
1: OFF (Do not change this setting.)
2: OFF (Do not change this setting.)
3: OFF (Do not change this setting.)
4: OFF (Do not change this setting.)
5: OFF (Do not change this setting.)
6: OFF (Do not change this setting.)
(2) S301: 4-bit DIP-SW. Do not change any
of the factory settings below.
1: ON (Do not change this setting.)
2: ON (Do not change this setting.)
3: OFF (Do not change this setting.)
4: OFF (Do not change this setting.)
2.5.4. AIS Processing Circuit CDC-1353
Connect the jumpers as shown in the picture.
S301
S300