4-1
Chapter 4 Operation
Do not place a vessel containing water, etc. or a metallic object on this unit.
When water spills or when water or the object enters the unit, a fire, an electric
shock, or a failure may occur.
Do not use this unit at a voltage other than the supply voltage stated on the unit.
Otherwise, a fire, an electric shock, or a failure may occur.
Do not insert or remove the power cord or operate switches with a wet hand.
Otherwise, you may suffer from an electric shock.
Do not damage or modify the power cord. Placing a heavy object onto, heating,
stretching or bending the cord may cause a fire or an electric shock.
When this unit is suddenly moved from a cool place to a warm place, drew
condensation water may form on the inside windows, and the liquid crystal part
can become visually difficult. In this case, leave the unit for a while until
becoming dry condition. Then operate the unit.
WARNING
CAUTION
To Next Page
Loading...
