EasyManua.ls Logo

JRC NWZ-4610 - Alarm

JRC NWZ-4610
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-3
5.2. Alarm
Refer to "4.9.11 Displaying an alarm" and check if any alarm is given or not. If it is, check the details
referring to the list shown below.
Alarm List
Message
Number
Message Contents Alarm Causes
2/3/7 SOG/STW/SOG(LOG) Speed alarm occurs
10 TRIP Trip alarm occurs
17 WATER TEMP Water Temperature alarm occurs
18 DEPTH Depth alarm occurs
19/20 TWS/AWS Wind alarm occurs
21 AIR TEMP Air temperature occurs
22 PRESSURE Pressure alarm occurs
23 HUMIDITY humidity alarm occurs
45 ROM[1] Flash ROM Deletion, Write Error (ROM[1])
46 ROM[2] Flash ROM Deletion, Write Error (ROM[2])
47 ROM[3] SEEPROM Deletion, Write Error
48 RAM RAM Read, Write Error
49 SIO[0] Serial Port Error (SIO[0])
50 SIO[1] Serial Port Error (SIO[1])
51 SIO[2] Serial Port Error (SIO[2])
52 SIO[3] Serial Port Error (SIO[3])
53 SIO[6] Serial Port Error (SIO[6])
- No Sensor Data Sensor periodic input not possible (No data)
- Sensor Data Invalid
Sensor information unobtainable (Position, Time,
Course, etc.)

Table of Contents

Other manuals for JRC NWZ-4610

Related product manuals