4-27
4.7. Language Settings
You can set the display language to nine languages (English/Japanese (katakana)).
To change the language, place the unit in the maintenance mode.
A maximum of nine languages: Other than English / Japanese, it is due to add one by one.
Procedure
1. Refer to “4.9.1 Changing to a maintenance mode” to display the maintenance menu.
2. Press the
key to select “LANG” and “LANG” in order.
3. Press the
key to select the language, and press the key.
4.8. Alarm Settings
Selecting “ALARM” on the main menu displays the alarm setting screen.
When the set alarm occurs, the pop-up and the alarm icon “
” on the status bar alert the occurrence
of an alarm as well as the buzzer sounds. The screen lighting color can also be changed.
Pressing the
key stops pop-up, buzzer sound, and screen lighting, but the icon continues
appearing until the alarm has been resolved.
The unit must be placed in maintenance mode to change the alarm settings.
The following alarms can be configured.
1) SYSTEM: An alarm occurs when the system error occurs.
2) SPEED: An alarm occurs when the ship speed matches the set parameters.
3) TRIP: An alarm occurs when the distance matches the set parameters.
4) WATER TEMP: An alarm occurs when the water temperature matches the set parameters.
5) DEPTH: An alarm occurs when the water depth matches the set parameters.
6) WIND: An alarm occurs when the wind velocity matches the set parameters.
7) AIR TEMP: An alarm occurs when the air temperature matches the set parameters.
8) PRESSURE: An alarm occurs when the atmosphere matches the set parameters.
9) HUMIDITY: An alarm occurs when the humidity matches the set parameters.
When alarms are set to OFF, the alarm settings are cleared.
The alarm sound and screen brightness color when an alarm occurs can be set.
1) SOUND ON: The buzzer sounds when an alarm occurs.
OFF: The buzzer does not sound when an alarm occurs.
2) LCD COLOR ON: The screen brightness color changes when an alarm occurs.
OFF: The screen brightness color does not change when an alarm occurs.
If normal brightness color is set to white, it becomes orange, and vice versa.
To Next Page
Loading...
