JRC NWZ-4610 - Basic Operation; Turning on the Power; Starting (Normal)

4-8
4.2. Basic Operation
4.2.1. Turning on the power
When the main power is turned on, the power to the display unit is automatically turned on.
In the state in which the power is turned off by the display unit key operation, pressing the
key
turns on the power.
When the main power is OFF
Turning on the main power
When the main power is ON
Turning on the power
Pressing the power key
When the power is ON for first time.
The following screen is displayed. Select a Model with and press .
Model
When "LOG" is selected wrong
Refer to "Caution" in "4.9.2 setting a model".
4.2.2. Starting (Normal)
If all the self-check results are ‘OK’, the screen is automatically changed to the normal screen.
All OK
If the power cannot be turned on, check the main power of the power distribution board and the
cable connection to the display unit.
Caution
JRC
ENT
ON