JRC NWZ-4610 - Page 29

4-7
Main menu Sub menu Range Reference/remarks
IEC 4.9.4.4
SENTENCE Sentence list 4.9.4.4 SEND only
BIT RATE 38400/57600/76800/115200 4.9.4.4
CONTACT INPUT DIMMER/ACK 4.9.6.1
CONTACT OUTPUT
200PULSE/NM/
400PULSE/NM/
OFF
4.9.6.2
DIAGNOSIS CONFIG OUT/ERROR LOG OUT 4.9.7/4.9.15
MAINTENANCE INPUT DATA 4.9.9
DIAGNOSIS 4.9.10
DISPLAY DIAG 4.9.10
MONITOR TEST 4.9.10
BUZZER TEST 4.9.10
ERROR LOG 4.9.11
ALARM 4.9.11
ERROR LOG 4.9.11
SOFT VERSION 4.9.12
DISPLAY VER 4.9.12
APP VER 4.9.12
SERIAL NUMBER 4.9.12
BARCODE 4.9.12
MASTER
RESET
GRAPH RESET 4.9.13
DISPLAY RESET 4.9.13
DEMO MODE DEMO TYPE 4.9.14
STATIC 4.9.14
COURSE 0-359.9° 4.9.14
STRAIGHT 4.9.14
SPEED 0-99.9kn 4.9.14
COURSE 0-359.9° 4.9.14
RIGHT 4.9.14
SPEED 0-99.9kn 4.9.14
COURSE 0-359.9° 4.9.14
LEFT 4.9.14
SPEED 0-99.9kn 4.9.14
COURSE 0-359.9° 4.9.14
DATE 4.9.14
TIME 4.9.14
LATITUDE 4.9.14
LONGITUDE 4.9.14
DEMO MODE START/END 4.9.14
SOFT UPDATE DISPLAY －
DESPLAY TYPE MID/LOG/GPS/OFF
4.9.2
Factory setting: OFF
"GPS" is due to add one
by one.
RS-485ID 1-10 4.9.4
DIMMER
GROUP
1-10 4.9.4.3
DIMMER KEY/EXT DIMMER 4.9.3
CURRENT LAYER/DATA No 4.9.16