JRC NWZ-4610 - Setting a Buzzer Sound and Screen Back Light

4-32
4.8.11. Setting a buzzer sound and screen back light
An alarm sound and the color of the screen back light at the occurrence of an alarm can be set.
When the back light color under the normal condition is set to white, the color is changed to orange and
when the back light color is set to orange, the color is changed to white.
1) SOUND ON: When an alarm occurs, the buzzer sound is emitted.
OFF: Even if an alarm occurs, the buzzer sound is not emitted.
2) LCD COLOR ON: When an alarm occurs, the back light color of the screen is changed.
OFF: Even if an alarm occurs, the back light color of the screen is not changed.
Procedure
1. Refer to “4.9.1 Changing to a maintenance mode” to display the maintenance menu.
2. Select “SOUND” by using
.
3. Select “ON” or “OFF” by using
and press .
4. Select “LCD COLOR” by using
.
5. Select “ON” or “OFF” by using
and press .
Select SOUND
Select LCD COLOR