6-1
Chapter 6 Installation
Consult with JRC or our agents to install. Installation by unauthorized personnel may
result in a malfunction.
Do not install this unit at the place exposed to direct sunlight for a long time or hit by hot
wind or where the temperature rises above 55℃. Otherwise it may cause a fire or a
breakdown.
Do not put the equipment on the unstable place such as wobbly base or tilted area.
Otherwise it may cause the equipment to drop or fall, resulting in an injury or a failure.
Do not put the equipment in the cabinet or cover it with the nonporous thing such as
cardboard. Otherwise it may cause the equipment to be filled with heat, resulting in a
fire or a failure.
When this unit is suddenly moved from a cool place to a warm place, drew
condensation water may form on the inside windows, and the liquid crystal part can
become visually difficult. In this case, leave the unit for a while until becoming dry
condition. Then operate the unit.
CAUTION
To Next Page
Loading...
