4-16
4.5.4.1. Selecting User Mode
MID can set up to three user modes.
Up to six screens can be registered in each mode, and up to 18 screens can be registered.
Press the
key to change the set user mode.
User mode 1 User mode 2 User mode 3
Select the user mode before selecting the display screen.
Procedure
1. Display a main menu by pressing
(normal mode).
2. Press the
key to select “DISPLAY,” and press the key.
3. Press the
key to select “MODE1,” “MODE2,” or “MODE3,” and press the key.
User mode
The user mode refers to scenes such as going to a waypoint, arriving at a waypoint, calling at a
port, ....
The user can select more convenient screens by registering six screens that suit each scene
(user mode).
Supplement
or automatic
To Next Page
Loading...
