JRC NWZ-4740 - Stopping Navigation; Ending Navigation with GOTO Key; Ending Navigation in Menu

4-60
4.6.3 Stopping Navigation
· Navigation currently underway can be stopped.
· To end the navigation, there are two methods: selecting in the menu and holding down
.
4.6.3.1 Ending Navigation with GOTO key
· Operation can be performed on any screen other than the menu, waypoint information,
navigation assistance 4 screen.
1. Press and hold down
(over 3 seconds).
2. The following will be displayed, and then select "YES"
.
4.6.3.2 Ending Navigation in Menu
1. Press
, , and then to display the route start/end screen.
2. Press
"NAVIGATION" to stop navigation.
3. The following will be displayed. Select "YES".
Procedure
Procedure