4-95
4.16.9 Setting LORAN A/C
· Position displays and settings can be performed based on time differences.
· Please refer to "4.20 Equipment Configuration" and switch the unit to equipment configuration
mode.
1. Press
, , and then to display the LORAN setting screen.
2. Press
"LORAN A/C".
3. Press to set the time difference display, and press
.
The time difference display settings are as follow.
(1) OFF: Latitude and longitude is displayed.
(2) LORAN A: Switches to the LORAN A setting screen.
(3) LORAN C: Switches to the LORAN C setting screen.
LORAN A LORAN C
4. The LORAN A or LORAN C setting screens are displayed.
5. Select the item you wish to set with the numeric keypad.
6. Enter each value with the numeric keypad or , and press
.
· Configurable LORAN A stations:
1S1 1S2 1S3 1S4 1S6 1L0 1L1 1L4 1L5 2S0 2S1 2S2 2S3 2S4 2S5 2S6 2S7 2H4 2H5
2H6
· Configurable LORAN C chains:
4990 5930 5970 5980 5990 6730 6731 6780 7001 7030 7170 7270 7430 7499 7930
7950 7960 7970 7980 7990 8000 8290 8390 8830 8930 8970 8990 9007 9610 9930
9940 9960 9970 9980 9990
Procedure
Memo
To Next Page
Loading...
