4-24
4.3.9.6 Registering Event/Mark Positions to the Waypoint List
Event and mark positions can be registered to the waypoint list.
This enables them to be used as waypoints.
1. Press
, and display the cursor.
2. Press to move the cursor to the event or mark symbol you wish to
register to the waypoint list, and display the event or mark information.
3. Press
to display the edit screen.
4. Press
"ENTRY FOR WPT".
5. The waypoint list will be displayed. Select the number of the waypoint you wish to register,
and press
.
Please refer to "4.8 List Screen Operation" for details regarding how to select waypoint
numbers.
4.3.9.7 Deleting Event/Mark Symbols
Registered events and marks can be deleted.
1. Press
, and display the cursor.
2. Press
to move the cursor to the event or mark symbol you wish to delete, and display
the event or mark information.
3. Press
.
·
Event and mark symbols can also be deleted from the event/mark list.
Please refer to "4.7.4 Deleting Event/Mark Information".
Procedure
Procedure
Memo
To Next Page
Loading...
