4-82
4.14 Display Settings
If "1.DISPLAY" is selected on the main menu, the display menu will be displayed. On the display
menu, you can set the contrast, dimmer, click sound, reversed display, input assistance, and
screen display.
The following is an overview of each submenu.
(1) CONTRAST: You can set the LCD contrast.
(2) DIMMER: You can set the LCD's brightness levels.
(3) CLICK SOUND: You can turn the click sound when keys are pressed on or off.
(4) REVERSING MODE: You can switch the display's black/white setting.
(5) INPUT ASSIST: You can turn screen display of the characters assigned to the
numeric keypad on or off.
(6) DISPLAY SELECT: You can set which screen is displayed, and which screen is shown
on startup.
4.14.1 Adjusting Contrast
· You can set the LCD contrast.
· Contrast value 1 is the highest amount of contrast, while 13 is the least amount of contrast.
· The default value is 7.
1. Press
, , and then to select "CONTRAST".
2. Press to adjust the contrast, and press
.
4.14.2 Adjusting Brightness
·
Brightness adjustment can be performed by pressing
to select bright, medium, dark, or
off.
Here, you can set the levels for each brightness level.
1. Press
, , and then and select "DIMMER".
2. Press to increase or decrease the value by one. The screen brightness will
change at the same time.
3. Press
. (Medium and Dark can be adjusted the same way.)
Procedure
Procedure
To Next Page
Loading...
