4-36
4.4.5 Copying Waypoint Information
· Waypoint information can be copied to another waypoint number. Event and mark information
can also be copied to the waypoint list. HOME is treated as number 1 on the waypoint list.
· The waypoints used by the shared active routes received from ECDIS, which are stored in
number 10001 - 10512, are automatically overwritten when the next route is received.
Waypoints which you wish to retain must be copied to a number between 1 and 10000.
· The temporary route waypoints stored in numbers 10513 to 11024 disappear when a different
temporary route is created or the power is turned off. Waypoints which you wish to retain must
be copied to a number between 1 and 10000.
· When there is no more space available, entries can be overwritten. However, waypoints used
by a route cannot be overwritten.
· Select the source to copy from, and specify the number to which the information is to be
copied.
1. Press
, , and then , and display the waypoint/route copy screen.
2. Press "WPT COPY".
3. The cursor will move to the "COPY ORG", so press
.
4. Press to select the copy source, and then press
.
The following is an overview of the copy source submenu.
(1) WPT LIST: From the waypoint list, choose 1 waypoint number, or a string of
contiguous waypoint numbers.
Any number can be selected, from 1 to 11024.
(2) EVENT LIST: From the event/mark list, choose 1 event/mark number, or a string of
contiguous event/mark numbers.
(3) WPT No: Use the numeric keypad to enter the waypoint number.
(4) FROM TO: Use the numeric keypad to enter the start and end numbers from the
waypoint list.
(1) When "WPT LIST" is Selected
The range to be copied is confirmed when
is pressed after selecting the start and end
point.
Please refer to "4.8.3 Selecting a Range within a List" for details regarding range selection.
(2) When "EVENT LIST" is Selected
The range to be copied is confirmed when
is pressed after selecting the start and end
point.
Please refer to "4.8.3 Selecting a Range within a List" for details regarding range selection.
Procedure
To Next Page
Loading...
