4-18
4.3.8 Track Display
· The own ship's track can be displayed.
· A maximum of 2000 points of track can be stored. Once this number is exceeded, old track
points will be automatically deleted.
· To turn off track display, set "TRACK" to "OFF" as described in "4.3.12 Hiding Plot Screen
Symbols".
4.3.8.1 Setting the Track Period
Memory intervals can be set to units of time or of distance.
The following periods can be set:
Time: Can be set in 1 second increments between 1 and 60 minutes.
Distance: Can be set in 0.01 NM increments between 0.01 and 99.99 NM.
1. Press
, , and then and select "TRACK PERIOD".
2. Press to select either "TIME" or "DIST", and press .
3. Use the numeric keypad to enter the period, and press
.
· If the period is set to "OFF", track memory will be deactivated. Previously stored data
will be retained.
Procedure
Memo
Own ship
Track
To Next Page
Loading...
