JRC NWZ-4740 - Section 2 Names and Functions of Each Unit; 2.1 NWZ-4740 DISPLAY UNIT

2-1
Section 2 Names and Functions of Each Unit
2.1 NWZ-4740 DISPLAY UNIT
z Unit (Front)
Control Panel
Key Name Function
MOB MOB key Displays the plotting screen, and stores the location where a
crewmember/passenger has fallen in the sea
DISP Display key Changes the display contents on the screen.
MENU Menu key Displays the main menu screen.
Up, Down,
Left, and Right
keys
These keys scroll the screen and move the cursor.
1/MARK Enters 1. This key also displays the symbol at the cursor position
on the plotting screen, and stores its position.
2/EVENT Enters 2. This key also displays the symbol at the present
position on the plotting screen, and stores its position.
3/←→
Enters 3. This key also increases the size of the display area on
the plotting screen.
4/＃
Enters 4. This key also prints to printer and sets the print out
interval.
5/GOTO Enters 5. This key also sets the waypoint.
6/→←
Enters 6. This key also decreases the size of the display area on
the plotting screen.
7/CURS Enters 7. This key also selects whether to display/hide the
cursor on the plotting screen.
8/AZI Enters 8. This key also selects North Up, Course Up, or Relative
North Up on the plotting screen.
9/HOME Enters 9. This key also moves the own ship's position to the
center on the plotting screen.
0/＊
Numeric keys
Enters 0. This key also displays alarm information.
CLR Clear key Cancels operation and clears alarm information.
ENT Enter key Sets the entries.
DIM Dimmer key Adjusts the brightness.
PWR/CONT Power/contrast
key
Turns on the power. This key also adjusts the screen contrast.
The power is turned off when the DIM and PWR/CONT keys are
pressed at the same time.
Displa
y
Information received from the GPS receiver, the equipment setting
screen, etc. are displayed.
Operation panel
Buzze
r