4-110
(5) When "JRC" is Selected
The bit rate is fixed at 1200 bps.
(6) When "PRINTER" is Selected
Data is output in dedicated printer format.
Select the bit rate and output interval.
The bit rate is selected at 4800bps for DPU-414 Printer.
Select the interval. If "OFF" is selected, data is not output. If "ONCE" is selected, data is
output one time.
(7) When "SWITCH" is Selected
The bit rate is fixed at 4800 bps, and data is output for automatic switching control
(NCZ-1573A).
If "SWITCH" is selected when the LAN mutual monitoring mode is set to "OFF", the screen
at right will be displayed and the mutual monitoring mode will be set to "ON".
If you do not need automatic switching control, do not set this field to "SWITCH".
Mutual monitoring mode
is "ON"
To Next Page
Loading...
