④
Retrieval of the origin
Press
❻
to bring the origin retrieval needle
bar to its upper position.
* In the case "U090 Initial operation upper
position stop function
"
is set to "1", the
screen shown on the left is not displayed,
but the needle bar automatically goes up
to its upper position.
<Origin retrieval screen>
③
Setting the clock
1. Press
❸
.
The "mode screen" is displayed.
2. Select the "7. Clock setting".
The "clock setting screen" is displayed.
<Mode screen>
❸
❺❹
❻
3. Enter year/month/day/hour/minute/sec-
ond with
❹
.
The time entered is displayed in 24-hour
notation.
4. Press
❺
to conrm the clock set-
ting. Then, the current screen returns to
the previous screen.
<Clock setting screen>
– 13 –
To Next Page
Loading...
