JUKI DDL-9000C-F - Confirmation of the amount of oil in the hook oil tank; ADJUSTMENT OF THE MACHINE HEAD (APPLICATION)

– 79 –
6. CARE
Perform the maintenance below every day for longer use of your machine.
The maintenance mode should be used for maintenance of the sewing machine.
6-1. Maintenance mode
Be sure to check that the screen
has changed to the maintenance
mode screen so as to prevent
accidents caused by abrupt start
of the sewing machine.
While the sewing machine is placed in the maintenance mode, it will not start even if the pedal
is depressed.
1) Display the mode screen by pressing
❶.
2) The screen is changed over to the mainte-
nance mode screen.
Conrm that the top of oil amount indicating rod ❶
is between the upper engraved marker line A and
the lower engraved marker line B of the oil amount
indicating window. (For the details, refer to "2-12.
Lubrication" p. 11.)
6-2. Conrmation of the amount of oil in the hook oil tank
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❶
A
B
❶