2-13. How to use the operation panel (Basic explanation)
2-13-1. Selection of the language (operation to be done at rst)
Select the language to be displayed on the operation panel when you turn ON the power to your sewing
machine for the rst time after the purchase. Note that, if you turn the power OFF without selecting the
language, the language selection screen will be displayed every time you turn ON the power to the sew-
ing machine.
①
Turning ON the power switch
②
Selecting the language
The language to be displayed on the operation panel can be changed using the memory switch U406.
Refer to "4-5. List of memory switch data" p. 62 for details.
Firstly, the welcome screen is displayed
on the panel. Then, the language selection
screen is displayed.
Select the language you want to use and
press corresponding language button
❶
.
Then, press
❷
.
This determines the language to be dis-
played on the panel.
<Welcome screen>
Be aware that the needle bar moves automatically. The needle bar can also be set so that it
does not move automatically. Refer to "4-5. List of memory switch data" p. 62 for details.
<Language selection screen>
❷❶
– 12 –
To Next Page
Loading...
Need help?
General
