JUKI DDL-9000C-F - Editing Cycle Sewing Data

– 105 –
8-3-2. Editing cycle sewing data
Keep
❶
held pressed for one second on
each sewing screen.
The "cycle sewing step edit screen" is dis-
played.
<Sewing screen (Cycle pattern)>
❸
<Cycle sewing step edit screen>
1. Sewing pattern number (1 to 10) is dis-
played in
❷
.
Press
❷
to conrm the selection.
2. In the case a step(s) can be additionally
registered in the pattern, a step consisting
of zero (0) stitch is displayed at the tail end.
"Registered cycle pattern selection screen
(In numerical order)" is displayed by press-
ing a step consisting of zero (0) stitch.
<Registered cycle pattern selection screen
(In numerical order)>
3. Press
❺
.
Press
❻
to conrm the setting.
4. Press
❸
while selecting a step.
Then, the "registered cycle pattern selection
screen (In numerical order)" is displayed.
Insert a pattern ahead of the selected step.
5. The pattern is deleted by pressing
❹
.
❷
②
Setting a cycle sewing pattern
①
Displaying the sewing screen (cycle pattern) for cycle pattern
③
Conrming the data entered
<Cycle sewing step edit screen>
Press
❼
to complete the operation.
Then, the current screen returns to the sewing
screen for cycle sewing.
❼
❻❺
❹
❶