– 133 –
8-10-2. How to assign a function to a key
①
Displaying the key customization mode list screen
1. Press
.
The "mode screen" is displayed.
2. Select the "10. Key customization setting".
The "key customization mode list screen" is
displayed.
②
Setting the key customization
<Key customization mode list screen>
<Mode screen>
1. Select "1. Pattern sewing under operator
mode". Then, "key customization assign-
ment screen (operator mode)" is displayed.
2. Select "2. Pattern sewing under service
mode". Then, "key customization assign-
ment screen (Maintenance personnel
mode)" is displayed.
3. Select "3. Cycle sewing". Then, "key cus-
tomization assignment screen (Cycle
mode)" is displayed.
To Next Page
Loading...
