JUKI DDL-9000C-F - How to Reset the Count-Completion State

<Count-completion screen>
4-3-4. How to reset the count-completion state
When the predetermined conditions are
satised during sewing, the count-comple-
tion screen is displayed.
The counter is reset by pressing
❶
.
Then, the mode is returned to the sewing
mode. In this mode, the counter starts
counting again.
<Mode screen>
③
Conrming the data entered
Conrm the data on counter setting items
you have entered. Then, press
❸
to
return the screen to the mode screen.
When you press
❸
again, the screen
is returned to the sewing screen.
<Sewing screen (counter)>
The data on the counter function entered is
displayed.
❸
❶
– 60 –