– 132 –
8-10. Key customization
8-10-1. Assignable data
It is possible to register a desired function to a key to customize the peel key arrays. Functions that can be
assigned to panel keys are as described below.
The key to which no function is assigned is displayed in blank.
<Sewing screen (Operator mode)> <Sewing screen (Maintenance personnel mode)>
❹
❶
❺
❻ ❼
❽
❾
❶
❷
❸
❼
❻❺
❹
❷
❶
❷
❸
❺
❼
❽ ❾
❻
❹
❸
<Sewing screen (Cycle mode)>
Initial value
Assignable data
Operator mode
Maintenance personnel
mode
Cycle mode
❶
Counter Counter Counter Sewing pattern data
Sewing pattern number
Cycle pattern number
Memory switch
One-touch changeover
Bobbin winding
Counter
Function is not provided
❷
Sewing speed Sewing speed Thread tension Sewing pattern data
Sewing pattern number
Cycle pattern number
Memory switch
One-touch changeover
Bobbin winding
Function is not provided
❸
Thread presser Thread presser Sewing pitch
❹
Thread tension Thread tension Sewing speed
❺
Sewing pitch Sewing pitch Thread trimming
❻
Presser foot pressure Presser foot pressure Presser foot pressure
❼
Thread trimming Thread trimming
Stop position of needle bar
❽
Sewing data list Feed dog height
❾
Feed mode Thread presser
Stop position of needle bar
Feed dog height
To Next Page
Loading...
