Adjustment Procedure
Results of Improper Adjustment
4) Inside a gear box
* It is prohibited to use oil for the mechanism element inside a
gear box because of special surface treatment and an exclusive
grease lubrication.
1. Apply grease to the mechanism element inside a gear box.
“When you have torn it down including removal of the shaft, ap-
ply grease to a grease groove and uctuation part of each shaft.
2. Apply exclusive grease not only to the link cover ❶ that is cov-
ering a mechanism element but also the felt part of a horizontal
feed cam lubrication felt ❷.
– 143 –
To Next Page
Loading...
