JUKI IP-420 User Manual

1
ENGLISH
INSTRUCTION MANUAL
AMS-210EN / IP-420
* "CompactFlash(TM)" is the registered trademark of SanDisk Corporation, U.S.A.

JUKI IP-420 Specifications

General

Brand	JUKI
Model	IP-420
Category	Sewing Machine
Language	English

Summary

Mechanical Section

1. Specifications

Detailed technical specifications of the sewing machine.

3. Installation

Step-by-step instructions for setting up the sewing machine.

3-14. Connecting the pneumatic components (Pneumatic type only)

Instructions for connecting pneumatic system components.

3-16. Cautions for the compressed air supply (source of supply air) facility

Important considerations for compressed air supply system.

4. Preparation of the Sewing Machine

Steps for preparing the sewing machine before operation.

4-2. Attaching the needle

Step-by-step guide for attaching the needle.

4-3. Needle size and gauge

Information on selecting and adjusting needle size and gauge.

4-4. Threading the machine head

Guide on how to thread the sewing machine head.

4-6. Installing the bobbin

Step-by-step guide for installing the bobbin.

4-7. Adjusting the thread tension

Guide on adjusting needle and bobbin thread tension.

5. Operation of the Sewing Machine

Instructions on how to operate the sewing machine.

5-1. Sewing

Detailed instructions for operating the sewing machine.

Operation Section (With Regard to the Panel)

2. When Using IP-420

Guide on how to use the IP-420 operation panel.

2-3. Basic Operation of IP-420

Step-by-step guide to basic operations using the IP-420.

2-4. LCD Display Section at the Time of Sewing Shape Selection

Details the display elements during sewing shape selection.

2-5. Performing Sewing Shape Selection

Step-by-step guide for selecting sewing shapes.

2-6. Changing Item Data

Instructions for modifying sewing parameters like scale rate and tension.

2-8. Performing Modification of Needle Entry Point

How to adjust thread tension and intermediate presser height.

(1) Editing the Thread Tension

Detailed steps for editing thread tension.

(2) Editing the Intermediate Presser Height

Detailed steps for editing intermediate presser height.

2-18. Changing Contents of Pattern Button

How to modify parameters of a selected pattern button.

2-22. Performing Combination Sewing

Steps for creating and managing combination sewing data.

(2) Creating Procedure of the Combination Data

Step-by-step guide for creating combination sewing data.

2-25. Changing Memory Switch Data

How to modify memory switch settings.

2-27. Using Communication Function

How to use communication functions for data transfer.

2-29. Using 2-Step Stroke Function

How to configure and use the 2-step stroke function.

(1) Setting of 2-Step Stroke Function

Steps to enable and configure the 2-step stroke function.

(2) Setting of 2-Step Stroke Position

How to set the intermediate position for the 2-step stroke.

2-30. Operation at the Time of X/Y Motor Position Slip

How to handle errors related to X/Y motor position slips.

(1) When the Error Is Displayed During Sewing

Steps to resolve X/Y motor position slip errors during sewing.

II. Maintenance of Sawing Machine

1. Maintenance

General procedures for maintaining the sewing machine.

1-1. Adjusting the Height of the Needle Bar (Changing the Length of the Needle)

How to adjust the needle bar height for proper needle length.

1-2. Adjusting the Needle-to-Shuttle Relation

How to align the needle and shuttle for correct timing.

1-11. Changing the Voltage of 100,/200V

How to change the machine's voltage settings.

1-12. Replenishing the Designated Places with Grease

1-13. Troubles and Corrective Measures (Sewing Conditions)

Common sewing troubles and their solutions.

4. Error Code List

4. Error Code List

A list of error codes, their descriptions, and recovery methods.