– 61 –
4. Descruption of the functions
(1) To use the functions of the serviceperson level
By pressing button on the sewing screen for three seconds, a mode screen for the service level 1
will be displayed; for six seconds, a mode screen for the service level 2 will be displayed. Pressing
restores the sewing screen.
The function that can be used differs depending on the levels as follows.
01 Memory switch 1
02 Counter setting
03 Standard pattern selection
04 Direct pattern registration
05 Pattern copy
It can be used
at the operator
level.
06 Direct pattern copy
07 Cycle pattern copy
08 Presser adjustment
09 Contrast setting
10 Ver. display
11 Communication
It can be used at the
serviceperson level 1.
12 USB format
13 Check program
14 Irregular operation setting
15 Key lock
16 Optional input/output settings
It can be used at the
serviceperson level 2.
17 NFC terminal registration Enable/Disable
18 NFC terminal resistration
To Next Page
Loading...
Need help?
General
